LEXIE Arca-Swiss Universal Multi-function L-bracket

Nice fit and finish. I'm ordering another!

Fit almost perfectly on to my Nikon D800 (usb connector door could'nt be openned). To be expected from a universal part though. Love the product. Ordered the custom fit one for my Nikon Z5II.

Perfect for my Pentax K3 iii

works as expected.

Great product

The Lexie L-bracket is a great fit for my OM5 Mark II providing the flexibility and features needed for a great small travel camera.

I've used 3LT brackets with DSLRs, but needed something short so I didn't have to keep removing the bracket to get to the battery door on mirrorless bodies. As always love their brackets and currently use them on 3 different Canon bodies. Very customizable. I had to make some minor adjustments for each depending on the camera body and also had to remove a non-essential screw on the bottom to get it work seamlessly on a couple of arca type manfrotto ballheads. Like one viewer said, there is alittle bit of play when placed in vertical orientation, but not as bad as I've seen with other brands. Solid choice for my needs and love the customizable features, flexibilty, and rubber grip that connects to the camera body.

Overall, I'm happy with the Lexie. I have two minor complaints:

- The Peak Design adapter it ships with is made out of plastic, which will wear out and could possibly crack while in the ballhead causing a catastrophic failure.
- The plate on the side of the camera has a small amount of play, enough to cause the camera to move slightly. This could be an issue during long exposures or when shooting focus or exposure brackets.

Aside from those two nits, it's a solid piece of kit. As usual with 3LT it's easy on the eyes, feels solid in hand, was easy to assemble and install.

Ideal for both landscape and portrait photos with ease

i'm switching from manfrotto to arca and i was searching for an universal L-bracket. LEXIE is perfect anf fit smooth on my R5 & R7

Lexie L-bracket fits my Sony a6400 well. However, now it blocks my nose when I use the offset EVF. 5-stars for the bracket, but I might not be using it too often. Probably only for astrophotography.

A great universal bracket that I’ll be able to use for years on a multitude of cameras.

perfect size L bracket for my Pentax K-1 Mark II

Works great with the Z8. Battery access is spot on. Some ports would be less easy to access (not memory card side though) but I don’t really need to access them very much so it suits perfectly and it’s over 2/3 the price of the dedicated 3LT Z8 version. Took a minute or two to work out how to join the two sections and what side to attach it to the camera

Great to see something that fits a Pentax Camera!

Nicely made. Great price in the recent sale. Could benifit from a bigger gap in the portrait bracket to fit a flip out screen in, although I believe the gap is really for cables. I'd really like to see a bracket with clearance machined in it to fit a capture clip directly rather than with a foot sticking out the bottom.

Handy addition to my old D40. Makes switching from landscape to portrait shooting mode a breeze..

Why didn’t I get one of these before now? Makes switching between landscape and portrait so much faster. Van Usual superb quality from 3 Legged thing.

Great L bracket for my Canon 90D!

Good quality L-braket. Feels more sturdy than my previous Ellie L-Bracket. But it is also noticably heavier, so may not go with me when travelling light. Very happy with the extras.... PD Capture Clip adaptor & tri-pod multi tool.

Solid product!

I used this Lexie mount during my vacation and was genuinely impressed by its versatility. It allows smooth transitions between horizontal and vertical shooting, which was perfect for my landscape and street photography. The Arca-Swiss fit is spot-on—secure and reliable.

I mounted it on my Pentax K3 III and it fits like a glove. I went with the orange version, and the contrast with my black camera looks fantastic. Great build quality and design. Highly recommended!

Used the spec measurements, ordered and crossed my fingers

Fits my Sony RX10IV perfectly and the copper colour looks great with the black camera, and the included PD adapter adds versatility at almost zero weight penalty as well as ensuring the camera is centred on the tripod in landscape mode.

Obviously it does the job as a L-bracket superbly as well and the fit and finish is perfect. This will be on the camera as long as I own it and if I change cameras I'll move this across or buy another 3 legged thing equivalent without a second thought. It's that good

I bought this bracket for my Nikon Zf after lots of research……..it arrived fairly quickly and was well packaged and easy to assemble. It feels solid and well engineered. The reason for giving it 4 rather than 5 stars is the fact that once the bracket is in situ I cannot fully open the battery compartment to change the battery, I have to loosen the bracket and swing it out of the way to get full access to the battery. A minor niggle but slightly annoying. Otherwise highly recommend.

I'd been holding out for dedicated X-H2(S) L-bracket from 3LT but when a LEXIE came up at a great price I thought I'd might as well grab one for the interim (who knows when or if X-H users will be graced with a dedicated option!)

When fitted to the camera it could almost pass as an integral component, especially in the darkness colourway. Functionality is as expected given L-brackets are essentially specifically-shaped pieces of metal, but I can vouch for the strap slot (I use a GB-001 hand grip) and included Peak Design Capture plate. It is a shame that PD compatibility requires the removal and installation of a longer screw, though this seems more flexible than the previous approach taken with ELLIE and I'm not sure how this could be further improved.

Fit and finish is on par with other 3 Legged Thing products, which is to say excellent. The included Toolz (which appears to have been revised to include two different hex bits) is a nice touch, though the larger hex bit necessary to secure the bracket to the camera could stand to be slightly longer so the rest of the tool doesn't foul the surrounding plate.

Overall, LEXIE is near-perfect for X-H2 and X-H2S owners, and going by the other reviews and the provided compatibility photos, seems a good choice for users of other systems too.

Superb quality as you would expect from 3LT. However I cannot access battery on my Fujifilm X-T5 when using this L-bracket but that is not big deal for me.

I should have gotten this a long time ago. Solid material and excellent workmanship. I love how it included the Peak Design plate because I have their carry system. Highly recommend.

Putting the Lexie together was very easy and it fits the Nikon D850 well. I now do not have to take the L-bracket off before downloading images. In the video it is shown attached to a side arm and it would be nice to know the screw size that fits, or the makes of side arms that attach to it. Otherwise it is a great unit.